| TROUGHS |
DURCON
troughs are cast in 6 ft. (1.8 meters) long sections with
no longitudinal joints.They available in three models.T-1,
T-2, and T-3 with the option of an "open end", "closed end"
or "center drain" style. A generous radius is provided at
the bottom corners for easy cleaning. A slope of 0.125 inch
(3mm) or more per foot assures complete drainage.
|
 |
MODEL
T-1
Model T-1 troughs are produced in three open end sections
as illustrated, each 6 ft. (1.8 meter) in length.These sections
or any portion of them can be cemented together to form an "open
end" or "closed end" trough up to 18 ft. (5.5 meters) in length.A
"center drain" trough is formed by cementing together two or
more sections or any portion of them and closing off |
| |
both
ends.The maximum length of a Model T-1 "center drain" trough
is 35 ft. 6 inches (10.8 meters). The outlet for a "closed end"
or "center drain" trough is located on the flat area of section
1.See DURCON SO-3R for the proper outlet required
|
 |
 |
MODEL T-2
Model T-2 troughs are designed specifically for use with
DURCON Octagonal Work Surfaces.
The model T-2 trough is 51 inches long, and drains in the center. |
|
|
MODEL T-2
Model T-3 troughs are produced in two open end sections as illustrated,
each 6 ft. (1.8 meter) in length. These sections or any portion
of them can be cemented together to form an "open end" or "closed
end" trough up to 12 ft. (3.6 meters) in length. A "center drain"
trough is formed by cementing together two or more sections
or any portion of them and closing off both ends. The maximum
length of a Model T-3 "center drain" trough is 23 ft. 6 inches
(7.1 meters). The outlet for a "closed end" or "center drain"
trough is located on the flat area of section 1. See DURCON
SO-3R for the proper outlet. |
 |
